How to create custom-fit replacement covers for fabric outdoor ottomans?

Creating custom-fit replacement covers for fabric outdoor ottomans is a practical and cost-effective way to refresh your outdoor furniture. Follow these steps to make durable, weather-resistant covers that fit perfectly.

Materials Needed:

- Outdoor-grade fabric (Sunbrella or similar)

- Measuring tape

- Scissors or rotary cutter

- Sewing machine with UV-resistant thread

- Pins or fabric clips

- Zipper or Velcro (optional for removable covers)

Step 1: Measure Your Ottoman

Carefully measure the length, width, and height of your ottoman. Add 1 inch to each measurement for seam allowances. For rounded ottomans, use a flexible tape measure to trace the curves.

Step 2: Cut the Fabric

Lay the fabric flat and mark your measurements. Cut panels for the top, sides, and bottom (if needed). For box-shaped ottomans, you’ll need five pieces (top + four sides).

Step 3: Sew the Panels Together

Pin the panels right sides together and sew along the edges, leaving an opening if adding a zipper or Velcro. Reinforce seams with a double stitch for durability.

Step 4: Finish the Edges

Hem the raw edges or use bias tape to prevent fraying. For removable covers, install a zipper or Velcro closure.

Step 5: Fit and Adjust

Slide the cover onto the ottoman and check the fit. Make adjustments if necessary.

Tips:

- Choose fade-resistant, waterproof fabric for longevity.

- Pre-wash fabric to prevent shrinkage.

- Use a walking foot on your sewing machine for thick fabrics.

With these steps, you can create stylish, custom-fit covers that protect and revitalize your outdoor ottomans!